With a projector lamp in the middle of the presentation or display, the screen suddenly be frustrating for you the warning. But there is no need to panic until you have the extra light available. For you, you can easily change the bulb, and then put on the show again quickly, with brighter images. Here is some information that can be read easily by removing the worn-out bulb.
For the first step you need to activateProjector and then leave your old bulb to cool for at least 10 or 20 minutes. Then there are the bulb and the door of the compartment to find. They are usually on the back of the projector. Check the manual to confirm the position of the lamp.
For the second phase, with a screwdriver, remove the security screws for the light bulb. Then remove the cover and clean, soft cloth to handle the bulb and clean the old light bulbCompartment.
You should also unplug the lamp from the tray. Most projectors usually with a quick install and uninstall the bulb to bulb.
Then, install the new lamp with clean cloth. You must make sure not to touch the bulb's nest with your hands. Remember to always treat the cloth around the bulb.
For the final step is to check the plug terminals and specialist bulb,to ensure that all connections are secure. Then install the battery cover and tighten the screws. You should be sure not to overtighten. Turn off the projector, control and make the new lamp.
0 comments:
Post a Comment